Lifemax Under Pillow Vibration Alarm Clock

Under Pillow Vibration

Alarm Clock

SKU: 331

Thank you for purchasing a Lifemax Under Pillow Vibration Alarm Clock. We

hope you’ll get many years of use from this product. We recommend you

read this document thoroughly to familiarise yourself with how your product

works, how you should use it safely and effectively and how to look after

your product to ensure it continues working as it should.

Instruction Manual

www.lifemaxuk.co.uk

Document Version No

Warranty Information

Your Lifemax product is guaranteed for one year against defective parts or

construction. This guarantee is from the date of purchase and is only valid with

proof of purchase, Please note this guarantee does not cover normal wear and

tear or damage caused by accident or maltreatment. The extended rights of this

guarantee are in addition to the consumer statutory rights and do not limit the

effect of these statutory rights.

Please register your product at https://www.lifemaxuk.co.uk/warranty.

Technical Specification

Model No 331 Battery Type 2 x AAA

Alarms 1 Size 93 X 70 X 15mm

This is a WEEE symbol. It indicates that when the end-user discards this product,

it must be sent to separate collection facilities for recovery and recycling. By

separating this product from other household-type waste, the volume of waste

sent to incinerators or land-fills will be reduced and natural resources will thus

be conserved. Lifemax Ltd provide an end-of-life solution for this product when

sold in the UK by accepting back any end of life items for processing by a local

registered waste disposal company.

331IM28022023.indd 1-2331IM28022023.indd 1-2 28/02/2023 11:10:1928/02/2023 11:10:19

www.lifemaxuk.co.uk

Document Version No

www.lifemaxuk.co.uk

Document Version No

Product Information

Ideal for those with hearing loss or for shift workers, this under pillow alarm clock will

vibrate to wake even the deepest sleeper.

How to use...

again to advance to day of the month setting and use the UP/DOWN button to adjust. Press

the CLOCK CAL SET button again to confirm and complete the time setting.

SETTING THE ALARM

Press and hold the ALARM SET button for 2 seconds to enter the alarm set mode and the

hour will flash on the upper section of the LCD screen. [Please note the hour setting can

be in either 12 or 24 hour mode depending on how you are viewing the alarm on the home

screen. If in 12 hour mode you should see AM or PM to the far left of the upper section of

the LCD screen. This can be changed by using the UP button prior to setting the alarm. Use

the UP/DOWN buttons to adjust the hours.] Press the ALARM SET button again to advance

to the minute setting and use the UP/DOWN buttons to adjust. Press the ALARM SET

button again to confirm the alarm setting and to return to the normal display mode. You

can use the ALARM ON/OFF button on the front of the alarm to activate or deactivate the

alarm. On the back of the alarm you can use the alarm BUZZER/VIBRATION selector switch

to choose buzzer and vibration, just buzzer or just vibration.

ALARM SNOOZE FUNCTION

When the alarm sounds you can press the SNOOZE button to snooze the alarm for around

8 minutes.

ACTIVATE DISPLAY BACKLIGHT

Press LIGHT button activate the display backlight.

ACTIVATE KEY LOCK FUNCTION

To lock the UP, DOWN, CLOCK CAL SET and ALARM SET keys on the alarm move the KEY

LOCK selector switch to the locked position.

What’s included...?

Under Pillow Vibration Alarm Clock

Travel Case

Safety Information

This product uses 2 x AAA batteries (not included). Use only designated battery type. Do

not use re-chargeable batteries. Do not mix battery types. Read instructions carefully and

install batteries correctly observing the polarity (+-) sign to avoid leakage. Always replace

sets of batteries at the same time. Do not mix old and new batteries. Do not attempt to

recharge non-rechargeable batteries. Remove batteries from the product when it will not

be used for an extended period of time to avoid leakage. Remove exhausted batteries to

avoid leakage. Do not short out battery contacts. Do not dispose of batteries in fire. Do not

immerse electrically operated products in water or other liquid. Wipe dean only.

1. Display

2. Snooze/Light

3. Up

4. Down

5. Alarm On/Off

6. Alarm Set

7. Clock Cal Set

8. Buzzer/Vibration

9. Key Lock

10. Battery Compartment

11. Stand

SETTING THE TIME

Press and hold the CLOCK CAL SET button for 2 seconds to enter time set mode and the

minute will flash on the LCD screen. Use the UP/DOWN buttons to adjust the minutes. Press

the CLOCK CAL SET button to advance to the hour setting and use the UP/DOWN buttons

to adjust. Press the CLOCK CAL SET button again to advance to the year setting and use

the UP/DOWN buttons to adjust. Press the CLOCK CAL SET button again to advance to the

month setting and use the UP/DOWN buttons to adjust. Press the CLOCK CAL SET button

PLEASE NOTE

IF YOU TURN THE CLOCK OVER YOU WILL SEE A RECTANGULAR SWITCH WITH A LOCK/

UNLOCK SYMBOL. IF THIS IS SWITCHED DOWN IT WILL LOCK ALL BUTTONS.

MAKE SURE THIS IS SWITCHED UP WHEN SETTING YOUR CLOCK.

331IM28022023.indd 3-4331IM28022023.indd 3-4 28/02/2023 11:10:1928/02/2023 11:10:19